Evo-All LED light ( Blue & Red&Yellow) all not work

Question

My car Ford Fusion 2012 se

can bus module  2007 - 0228827 - A1

hardware vr : 6

Firmware Vr : 71-34

All connections are good
At first, the lights worked but I did not follow the programming steps correctly
Then turn off the lights
It did not work again

I tried a lot of clicking on the programming button and removed the black ,But No avail
Not working yet

I do not have FLASH-LINK UPDATER

Please I want to solve this problem

Answer 1

Make sure the black 4 pin connector casing has not been pulled out.

Meter power and ground to make sure they are good.

If it still does not power up please contact tech support for further assistance at : 1-877-336-7797.

Comments

Thanks for the quick reply

Yes, I forgot the ground wire

All connections are good now

Lighting works well

Use two keys

I followed the steps well

But the remote start does not work

---

Please locate the dark blue wire in the 20 pin connector and touch it to ground (metal grounded part of the vehicle) and tell me which led lights up on the Evo.

---

Yes, I touched the dark blue wire in the ground I which red led lights up on the Evo

 

---

is the evo being used as a stand alone unit or with a remote starter?

---

Sorry I did not understand you

 

---

is the evo being used with a remote starter or on its own?

---

I use the evo being only

---

Turn on option C1 and D1 they are not on right now.

---

I'll check

I follow the connections in this video

https://www.youtube.com/watch?v=FaVdjN2gsXs

---

You need to turn on options C1 & D1/.

---

Ok , But I do not have FLASH-LINK UPDATER

 

---

Then you will need to get a flash link updater to enable the options.

---

Thank you for your cooperation