where is data plug located at evo-all

Question

do i first connect all wires to crimestopper rs-00 g5 then program that first then once that's done.

then connect the data cord to evo-all data ( does some know where that data port is at) then press button then watch all of the lights lite up then turn key and remote and unit is programmed then connect cors to it

                                                                               or is it

 

that you connect all wires to crimestopper the coonect the cord from crime to evo-all of the dtat port then proceed .

Answer 1

I highly recommend bringing your equipment to a professional shop/installer,  to eliminate possible damage to either the vehicle or modules or both. All programming procedures are clearly explained in the guides.

 

Thank you,

Answer 2

follow the vehicle installation guide found on fortin.ca

the evo-all installation guide covers all necessary connections along with the steps to program the evo to the vehicle.

once connections are done like in the guide, follow the programming procedure which is also located in the evo-all installation guide.

 

If the unit was purchased via an online reseller such as through amazon, please contact the reseller for any support inquiries.

Comments

datalink connector is the 4-pin black connector which is labeled as connector B in the EVO-ALL installation guide