2007 IS250/350 PTS

Question

2007 does not control factory alarm and accessing to power master switch at the door is not fun at all.

According to wiring diagram, it requires smartkey and ignition to disarm without unlock the door before start.

Does this mean, keyoverride-all will disarm factory alarm?

 

Also, I understand that programming remote starter to diesel timer and set at least 5 seconds or more but what about clutch?

I can use relay and jump 2 blue(input) and red(output) together. But should I use 2nd start output? or use 2nd status output and let clutch pedal jumped while running(remote started)?

 

Let me know ASAP, thanks and happy new year!

Answer 1

INT-SL+ has a special firmware for the is250 and a few other models so that you do not need to go i nthe door for door lock control.

https://fortin.ca/download/4081/int-sl%2B_toyota_lexus_door_lock_interface.rev-20120403.pdf

Comments

what if car is 2006? will it work?

and can you please tell me about clutch bypass function?

5 seconds delay is only for the brake, so will both ways work?

---

INT-SL will only work on models listed in the installation guide. It was not tested on anything else.

I have no information for manual vehicles.