Door Trigger 2013 Murano not functioning

Eco all in standalone mode. Everything wired correctly. With pink/black hooked up all lights stay on with door closed With wire disconnected remote start works but lights stay on when stopped. If driving vehicle says door open

asked Sep 28, 2019 in Nissan by Mark reite (220 points)

1 Answer

Sounds like the unit is grounding itself through the driver door pin.

answered Sep 30, 2019 by derek g (346,560 points)

Unit installed with harness. Would the harness be defective then. Everything seems to work except the pink with black is grounded as soon as the unit is powered up.

commented Sep 30, 2019 by Mark reite (220 points)

Try running your own ground wire from the black 4 pin connector see if that solves the issue.

commented Sep 30, 2019 by derek g (346,560 points)

Ran separate ground to 4 pin. Issue still the same.

commented Sep 30, 2019 by Mark reite (220 points)

try flashing aidfferent version into the module and see if that changes the output, if not, the module has been damaged resulting in that output being grounded all the time.

commented Sep 30, 2019 by derek g (346,560 points)

Must be defective. Tried different firmware.

commented Sep 30, 2019 by Mark reite (220 points)

It could also be that options are not set up properly. Example.... Pink/Black is a hand/brake output when stand alone is not enabled.

commented Oct 2, 2019 by Robert T (301,890 points)

Standalone enabled.

commented Oct 2, 2019 by Mark reite (220 points)

Questions & Answers

Door Trigger 2013 Murano not functioning

Please log in or register to answer this question.

1 Answer

Please log in or register to add a comment.

Questions & Answers

Door Trigger 2013 Murano not functioning

Please log in or register to answer this question.

1 Answer

Please log in or register to add a comment.

Related questions