I installed an evo-one with 441 rf kit and can't get any response from valet button or antenna LED

Question

2004 GMC Yukon Denali.

Answer 1

Hello,

What is the S/N to the module?

 

Best regards.

Comments

002B04 625747

---

Please try the following:

- Flash the remote starter with firmware 0.99

- Plug in and power up the evo-one in the vehicle for 1 minute

- Re flash remote starter firmware 1.26

- Re attempt rf programming via the valet button

 

If it sitll does not work, disconnect the brake wire and see if you can enter programming

 

When you enter programing mode the red led underneath the yellow loop will turn on.

 

Best regards.

---

It does not list a 1.26 firmware.

---

The recommended firmware is 70.18.

---

remote starter, not bypass, In pro mode click on the tab that says remote starter.

---

Still nothing.

---

Are you able to enter valet mode via the valet switch?

Ign on, 3x on valet switch, ign off.

The red led under the yellow loop will turn on solid when in valet mode.

---

Yes, and the antenna led came on as well.

---

Now I can get as far as the antenna led coming on steady but not flashing with both methods. Horn signals work as well.

---

It is working perfectly now. I had a bit of trouble with the second remote, but after a few tries it works as well. Thank you so very much!

---

No problem, glad you got it going!