2016 Honda cry smart entry warning light

Question

hello, the remote start is installed in a 2016 Honda CRV, after install the smart entry warning light stays on when the car is restarted after opening the door.

i reprogramed the eve-one and still the same error light.

is there a updated software version available?

Answer 1

After you open the door and the vehicle shuts down, if you wait 5-10 seconds before re starting the vehicle is the message still there?

 

Do you get the message when starting the vehicle normally?

 

Can you please rpovide the S/N number located on the back of the evo?

Comments

Hello Derik, The smart entry warning will come on every time i start the car. when i disconnect the Evo-one the error message will not come on.
the serial number is 002B04 249322
Thank you.

---

Can you specifiy which connector on the evo makes the message go away?

---

i have to disconnect the evo-one completely to turn of the smart entry warning light.

---

I would inspect the harness and the pins, sounds like perhaps something isnt fully seated or perhaps a pin is bent. There should be no message when starting the car normally.

---

i will check all the pins on the evo-one and the connectors.
i will keep you informed with my findings.
Thank you.

---

Hello,

I checked all the pins and wiring, everything looks to be normal.

I completely reprogrammed the evo-one again and the smart entry warning light is still on after starting the car.

When i have the car running and i unplug the connector next to the main connector the light will go off. With this connector unplugged I can’t restart the car when i turn the car off.

I hope this information will help you.

---

What is the entire vin number to the vehicle?

 

What country is this vehicle located in?

---

the vin is:2HKRM4H50GH632965

location USA

---

At this point I would suggest you call into technical support for further assitance. be sure to be at the vehicle with module on hand.

 

1-877-336-7797

mon - fri

9-530 est